3536 Brushless Motor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3536 Brushless Simple Motor Mount or Equivalent Bolt Pattern
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed these two 3536 brushless motor mounts specifically for an old Cessna 337 Skymaster ARF kit I never got around to finishing. This model was from Nitro Models which does not seem to sell airplanes anymore. I finally dusted it off after 10ish years, ditched the .25 engines and converted to electric. I am using two Flash Hobby D3536 D-Power motors. It uses 3mm bolts for both motor brackets as well as motor mounts to firewalls. 50mm length and 20mm. The front mount is shorter than the rear. This is a 5lb flying weight model so I made sure they were strong. These could be used for any conversion or larger electric plane that the length is appropriate.
- PETG
- 4 Walls
- 15% infill