ESP32-WROOM-32 (MicroUSB) Box with Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small box for the ESP32-WROOM-32 (28mm x 52mm approx. PCB). The lid holds well and the PINs and buttons are accessible.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 329
- Wydruki
- 1
- Wyświetlenia
- 1024
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I really like the original model from PLAUK. Unfortunately, I only had older versions of ESP32 boards with MicroUSB at home. This connector is more recessed and therefore I had to modify the box a bit.
No big deal, but I believe this version will be useful for other DIYers and electronics lovers. I tested it with all the cables I have at home and except for one that has a really huge piece of plastic around the connector, they all worked without any problems.
Recommended settings
Material: It doesn't matter, I used Gembir's ABS, which is really garbage.
Layer height: 0.2
Perimeters: It doesn't matter, I used 4
Infill: It doesn't matter, I used 10%
Infill Type: It doesn't matter, I used Gyroid
Supports: No
PS: I apologize for the lower print quality. I printed it from some garbage Gembird ABS that my wife's friend gave me because it is very hard to print with and he couldn't use it. 🤷