ESP32-WROOM-32 (MicroUSB) Box with Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small box for the ESP32-WROOM-32 (28mm x 52mm approx. PCB). The lid holds well and the PINs and buttons are accessible.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 330
- Makes
- 1
- Views
- 1,027
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I really like the original model from PLAUK. Unfortunately, I only had older versions of ESP32 boards with MicroUSB at home. This connector is more recessed and therefore I had to modify the box a bit.
No big deal, but I believe this version will be useful for other DIYers and electronics lovers. I tested it with all the cables I have at home and except for one that has a really huge piece of plastic around the connector, they all worked without any problems.
Recommended settings
Material: It doesn't matter, I used Gembir's ABS, which is really garbage.
Layer height: 0.2
Perimeters: It doesn't matter, I used 4
Infill: It doesn't matter, I used 10%
Infill Type: It doesn't matter, I used Gyroid
Supports: No
PS: I apologize for the lower print quality. I printed it from some garbage Gembird ABS that my wife's friend gave me because it is very hard to print with and he couldn't use it. 🤷