MSI MAG Coreliquid 240R v2 bracket to socket 1155
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MSI MAG Coreliquid 240R v2 bracket to socket 1155 + spacers + nut holders
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
- Info for 3D model:
You can use this model for plate on MSI MAG Coreliquid 240R v2. Tested with PLA material on Asrock Z77 Extreme 4 and Fatality Z77 Performance (Socket 1155). Needs backplate and bolts/screws M3.
- BOM list:
- Bolts M3x30 mm (x4)
- Screws M3 (x4)
- 3D Washer for M3 (include in model)
- 3D spacers between motherboard and 1155 plank (include in model)
- 3D plate with dimension for 1155 socket
- Print time: 120 min
- Length/Weight: 4.57 meters (14 gr.)
- Installation
Please check after assembly if the cupper plate contact good with the CPU. If not, you must lower the height of the spacers manually.
- Important notes
Warning* Don't tight extremely hard the bolts if you don't have backplate! It is possible to bend the board and cause damage.
Note* With this model you can use MSI RGB cap, but not fully pressed on the block. (clips are not locked). This will not affect MSI watercooler job.