MSI MAG Coreliquid 240R v2 bracket to socket 1155
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MSI MAG Coreliquid 240R v2 bracket to socket 1155 + spacers + nut holders
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 87
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Standard Digital File License
- Info for 3D model:
You can use this model for plate on MSI MAG Coreliquid 240R v2. Tested with PLA material on Asrock Z77 Extreme 4 and Fatality Z77 Performance (Socket 1155). Needs backplate and bolts/screws M3.
- BOM list:
- Bolts M3x30 mm (x4)
- Screws M3 (x4)
- 3D Washer for M3 (include in model)
- 3D spacers between motherboard and 1155 plank (include in model)
- 3D plate with dimension for 1155 socket
- Print time: 120 min
- Length/Weight: 4.57 meters (14 gr.)
- Installation
Please check after assembly if the cupper plate contact good with the CPU. If not, you must lower the height of the spacers manually.
- Important notes
Warning* Don't tight extremely hard the bolts if you don't have backplate! It is possible to bend the board and cause damage.
Note* With this model you can use MSI RGB cap, but not fully pressed on the block. (clips are not locked). This will not affect MSI watercooler job.