Mayako MX8 Steering Lock Out Thumb Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thumb Screw that can be used with a m3 both and nut to lock out the steering on a Mayako MX8 RC buggy
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thumb Screw for M3 Bolt and Nut to Lock Out Steering on a Mayako MX8 RC Buggy
This custom-designed thumb screw is an ideal accessory for RC enthusiasts looking to fine-tune their Mayako MX8 buggy's steering setup. It is specifically engineered to work with an M3 bolt (about 35-40mm in length) and m3 nut, providing a reliable and easily adjustable solution to lock out the buggy's steering. Once locked out steering servo links and turnbuckels can be adjusted to ensure that everything is set up precisely.
Insert a m3 nut (non-lock) into the top of the thumb screw and push down to the bottom. Thread in the m3 bolt until just the head is poking out and add some thread lock or superglue and then screw all the way in. Let dry and then it is ready for you to use on your Mayako MX8 buggy.
Please check your manual and Mayako Discord for further information on how to set up your steering.