Dishwasher Hose Support Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helps you drape your dishwasher hose at an elevated point so your sink won't drain back into it.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 124
- Wydruki
- 2
- Wyświetlenia
- 471
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Helps you drape your dishwasher hose at an elevated point so your sink won't drain back into it. Fits what I believe is a standard dishwasher hose (20mm diameter), supported by a ~ 3/16" diameter flathead wood screw (because that was what I had lying around 😁). The single mounting hole design worked out nicely as it allowed the bracket to pivot to follow the way the hose naturally wanted to curve in this position.
See picture for suggested print orientation & supports. Printed in PLA - the slots along the hose guide are intended to allow the PLA to flex out of the way as you push the hose in from the top, seemed to work fine in practice.