Dishwasher Hose Support Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helps you drape your dishwasher hose at an elevated point so your sink won't drain back into it.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 124
- Makes
- 2
- Views
- 471
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Helps you drape your dishwasher hose at an elevated point so your sink won't drain back into it. Fits what I believe is a standard dishwasher hose (20mm diameter), supported by a ~ 3/16" diameter flathead wood screw (because that was what I had lying around 😁). The single mounting hole design worked out nicely as it allowed the bracket to pivot to follow the way the hose naturally wanted to curve in this position.
See picture for suggested print orientation & supports. Printed in PLA - the slots along the hose guide are intended to allow the PLA to flex out of the way as you push the hose in from the top, seemed to work fine in practice.