1 / 2
2.5in Blast Gate to 2in SCH40 PVC (male + female adapters)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapters to connect my 2.5in Powertec blast gates to 2in SCH40 PVC dust collection system
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Two models to connect 2in PVC to 2.5in blast gates (I used Powertec metal blast gates).
No special requirements for printing. Each end fits snuggly with a friction fit, but if you're fighting gravity you can use some hot glue for PETG to PVC connections.
- Male adapter ← This one connects by inserting into to a 2in PVC fitting* and the blast gate goes on the other side. I use one of these for each tool I connect to a “Y” of the main line
- Female adapter ← This one goes in-line with the PVC main line. I use these ones for the main “T” where the two main lines split for each side of the workshop.