Oil Check Desk LED Lapm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a Simple Oil Check LED lamp. It is powered with a standard USB-C charging cable.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's just a Simple Oil Check LED lamp.
It is powered with a standard USB-C charging cable.
I used a leftover white 5V LED strip from a previous project for the light source.
For the connector, I used this simple USB-C female connector
If you do not like to deal with the soldering, you can get a USB LED strip, like this
Since I had only a white LED strip, I printed the lamp lid in red, but you can also print the lid in white and use a red or RGB strip…
I used standard PLA, but if you plan to use a much brighter LED strip, then PETG is a better option.
The lid should tightly fit without glue, but make sure to adjust the tolerance based on your printer's capabilities.
I made it as a fun birthday present.
Happy printing!