Oil Check Desk LED Lapm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a Simple Oil Check LED lamp. It is powered with a standard USB-C charging cable.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 37
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It's just a Simple Oil Check LED lamp.
It is powered with a standard USB-C charging cable.
I used a leftover white 5V LED strip from a previous project for the light source.
For the connector, I used this simple USB-C female connector
If you do not like to deal with the soldering, you can get a USB LED strip, like this
Since I had only a white LED strip, I printed the lamp lid in red, but you can also print the lid in white and use a red or RGB strip…
I used standard PLA, but if you plan to use a much brighter LED strip, then PETG is a better option.
The lid should tightly fit without glue, but make sure to adjust the tolerance based on your printer's capabilities.
I made it as a fun birthday present.
Happy printing!