1 / 3
SCAR barrel (or faux barrel) X-Shot Fury-X _silencer style_ — zdjęcie 1
1 / 3

SCAR barrel (or faux barrel) X-Shot Fury-X _silencer style_

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A short SCAR barrel for the X-Shot Fury-X in silencer style. Alternative also a version without rifling and 15mm ID.

Ocena
5 / 5
Polubienia
36
Pobrania
386
Wydruki
2
Wyświetlenia
1387
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A short SCAR barrel for the X-Shot Fury X in silencer style.

I shortened the Whisker SCAR barrel to 60mm and designed a (faux) silencer around it.

It can simply be inserted directly into the muzzle. If it sits too loosely in the muzzle due to printer tolerances, simply stick some E-tape around the SCAR barrel.


Other Fury-X stuff can be downloaded here.

  • Update 18.1.2025:
    Added a version with 15mm inner diameter and no rifling.


----------------------------------------------------------------------------------------------------------------------

The files are already pre-oriented.

My print settings for PLA:

0,2mm layer height
5 walls
20% gyroid infill
7 top and bottom shell layers
Z-seam position: back (to get a straighter outer seam and the inner seam will not be created directly at the rifling)
no supports needed

Thanks to Thanhtacles for the file I could use for this remix.

Tagi