1 / 3
Anycubic Photon Mono M7 Max Locking Exhaust Port Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the fume exhaust port on the back of the M7 Max. It connects to a 4" Hose to a carbon filter
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 385
- Wydruki
- 0
- Wyświetlenia
- 1361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (34)Powiązane
Highly suggested to print with a brim of at least 5mm inside and out.
Please follow the orientation in the screenshot to maximize filament savings and minimize excess supports.
Creality Hyper PLA seems to be strong enough, Its up to you if you want to use something different
