Milwaukee M18 adapter for SPTA Cordless Mini Polisher.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows the use of a Milwaukee M18 battery on an SPTA Cordless Mini Polisher.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This adapter allows the use of a Milwaukee M18 battery on an SPTA Cordless Mini Polisher. Provides a much longer runtime between charging.
The step-down converter I used is Step-Down Converter. Any DC-DC step-down converter can be used if it converts 24v to 12V.
Required Hardware
10 - M3 button head socket screws - 8mm long
2 - M3 button head socket screws - 18mm or 20mm long
12 - M3 heat-set threaded inserts
2 - 1/4" Male Spade Quick Splice Crimp Terminals 6.3mm Crimp Connector Non-Insulated
2 - Male Spade Connector - Note: Bend to 90 degrees while still hot from heat shrinking.
Print Settings
I printed with PLA or PETG. These are my standard print settings. The battery tabs are the design's weak point, so I printed at a 45-degree angle to avoid failure along the layer lines.
- Layer Height: 0.2 mm
- Walls: 4
- Top & Bottom Layers: 5
- Infill: Adaptive Cubic @ 40%
- Print Orientation: 45 degrees - See Photo
- Tree Support
M12 Version
Here is the link to my Milwaukee M12 battery adapter for SPTA Cordless Mini Polisher.