1 / 23
Milwaukee M18 adapter for SPTA Cordless Mini Polisher. — image 1
1 / 23

Milwaukee M18 adapter for SPTA Cordless Mini Polisher.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This adapter allows the use of a Milwaukee M18 battery on an SPTA Cordless Mini Polisher.

Rating
0 / 5
Likes
6
Downloads
26
Makes
0
Views
307
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This adapter allows the use of a Milwaukee M18 battery on an SPTA Cordless Mini Polisher.  Provides a much longer runtime between charging.

The step-down converter I used is Step-Down Converter.  Any DC-DC step-down converter can be used if it converts 24v to 12V.

 

Required Hardware

10 - M3 button head socket screws - 8mm long

2 - M3 button head socket screws - 18mm or 20mm long

12 - M3 heat-set threaded inserts

2 - 1/4" Male Spade Quick Splice Crimp Terminals 6.3mm Crimp Connector Non-Insulated

2 - Double Piggyback Spade Connectors Quick Disconnect Electrical Wire Spade Terminals Adapter Non-Insulated Brass Spade Connector

2 - Male Spade Connector - Note: Bend to 90 degrees while still hot from heat shrinking.

 

Print Settings

I printed with PLA or PETG. These are my standard print settings. The battery tabs are the design's weak point, so I printed at a 45-degree angle to avoid failure along the layer lines.

  • Layer Height: 0.2 mm
  • Walls: 4
  • Top & Bottom Layers: 5
  • Infill: Adaptive Cubic @ 40%
  • Print Orientation: 45 degrees - See Photo
  • Tree Support

 

M12 Version

Here is the link to my Milwaukee M12 battery adapter for SPTA Cordless Mini Polisher.

Tags