Counting matching models…
Slightly modified original model for better ergonomics. Original model works great but my hand was getting sore during use. The curved portion is more comfortable for the the index finger and gives more control when polishing. Recommend…
This is an improvement on my old model which was much bulkier and more uncomfortable to use. I found my last model to be really nice for the first grit but my hand would start to ache after a while so i made this smaller, softer and…
The original design is great but I didn't like the square design to hold the polisher. I initially made the rounded shape for my Krauss DB-5200 so it fits better. After trying it for my Krauss ShineMaster S15, which uses a more generic…
Edge polisher for leather. Suitable for all leather thicknesses.
Dimensions: L- 214mm, W- 66,38mm, H - 59mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX and part of the Discover. Create. FLEX collection. Visit the…
3D Model of XCE & XFE Dimensions: L-214mm, W -87,36mm, H -74mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX machen and part of the Discover. Create.…
3D Model of PXE Polisher Dimensions: L- 164mm, W -44,73mm, H - 59mm Support: Not required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX and part of the Discover. Create.…
Adjust Scale for your carpet thickness and bucket size. For my thin carpet and Lowes bucket 91% scale was prefect.
IMPORTANT: This model is now outdated, i have uploaded an improved design with comfort in mind. Instructions Attach usual sandpaper grits to print with tape/rubber bands. Lightly sand across each fret using progressively higher grits.…
I created this model to be able to store my DeWalt multitool on the wall. The tool hangs down from the mount so as to not put too much strain on the battery holder. This same mount can also be used for the following DeWalt tools: DCS355…
I've been printing a lot of ABS on my Bambu X1C, and that leads to fairly frequent “clean your rods you filthy animal!” warning messages. Figuring there had to be a better way than trying to get all around the rods with my fingers, I went…
I have been using a Marineland powerhead with a drinking water bottle attached with the bottom cut off and filter floss inside as a water polisher after doing tank cleanings to get rid of the nastiness. I wanted something a bit more…
Voici ma révision de la polisseuse reittec, basée à partir des modèles suivant: Le modèle originale de reitter m: https://www.thingiverse.com/thing:3666116/ La révision en 170mm: https://www.thingiverse.com/thing:4076827 les roulements de…
Description I was looking to refresh my guitar, an Ibanez electric, which has level but dull frets and a seriously dry fretboard. I had most of the tooling, but was missing something to help crown/polish the frets. So I found…
This adapter allows the use of a Milwaukee M12 battery on an SPTA Cordless Mini Polisher . Required Hardware 3 - M3 button head socket screws - 18mm or 20mm long 3 - M3 heat-set threaded inserts 4 - 1/4" Male Spade Quick Splice Crimp…
Additional material for this thing: -Bearing: 6001 (D28, d12, h8) -Glas: IKEA KORKEN 1L with sealing -Motor: Modelcraft RB350600-0A101R 12 V 1:100 (updated to 1:50) -Toggle switch: TRU COMPONENTS TC-R13-404AL2 (or similar) -Fuse holder:…
DC powered electric sander / polisher based on RS-555SH 36mm 12V 24V High Torque DC Motor. Attachments are easily exchangeable when sandpaper of different grids is required. Just print a few sets of them and equip each with different…
Polisher comes with a side handle, I wanted something in the center. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Infill: 15% Category: Machine Tools
You are looking for an easy way to polish your ABS and ASA prints? Now you have the chance to create your own vapor polisher. Disclaimer: I take no responsibility for this of any kind! Acetone is dangerous for any organism or plants. Take…
NOTE : I don't recommend this version anymore unless you really want a version that lays flat. The vertical model I made is a much better holder IMO. ---------------------------------- A gridfinity compatible holder for a mini…
This is a thingiverse import for a MaAnt D1 mini tool. Possibly fits the D2 version as well but I can't verify. Has case with compartments for drill and accessories plus lid. Thank you to user Auger from thingiverse for the design.…
Modified mounting thread for my Cecotec Cecoraptor polisher.
Remix of this great model for holding dewalt power tools only now for a french cleat wall
Design details can be found here. Build details are here Category: Machine Tools
A large, personified sun with a serene facial expression and closed eyes. It features classic pointed rays extending outward from its circular face. small man wearing a brimmed hat and work clothes (overalls) is perched on a ladder. He…
Balanced Micro Random Orbital Sander and Polisher with TPU pad included you will need: a ~10mm long D3.2mm rod to balance the centrifugal force and eliminate vibration a M3x5.5 pan head screw (head diameter ~6.6mm and height 2mm)…
Update 11/2021: Added a stronger drive gear, since the normal one failed. For this one you have to get the orientation right. In any case I recommend printing in ABS and checking the screw regularly to prevent coming loose. Reitec…
Just a quick DIY rock tumbler. Parts include: Motor mounting bracket Coupler for attaching tumbler shaft to motor D-shaft Support bracket for powered shaft Brackets for attaching the boards perpendicular Parts you will need: Boards to…
Don't you just hate those little burrs and blobs that you get on the top surface of your otherwise perfect prints? Or those edges that have come out just a little too sharp with excess filament? I do - so I found myself using some off-cut…
I modified this projet because I haven't found this IKEA vase. There are two files to be printed, the jar (redesigned with its ribs) and its cap. I hope to be helpful! Good job! P.S. Not finding the PGM 37DC12 / 77 engine I decided to use…
See Brew Better's video for refurbishing Gaggia Classic steam valves: [Edit: this did work for me for a time but the problem returned. I think there was pitting in the valve seat. In the end I wrapped some tape around a drill bit until it…
Allows you to put the Bauer DA upside down on a flat surface without it tipping over. No additional hardware needed.
This adapter allows the use of a Milwaukee M18 battery on an SPTA Cordless Mini Polisher . Provides a much longer runtime between charging. The step-down converter I used is Step-Down Converter . Any DC-DC step-down converter can be used…
With a cutout for a 3/16 x 1-¼ inch washer, you can use a smaller washer as well. I recommend using the washer as it makes the print more stable when polishing. Recommend using supports.
Mr. Hobby GTool cordless polisher pro & extra sanding disc skadis holder. v1: just the holder for the tool v2: includes slot for spare discs Should be an easy print, just through some supports on the hooks.
Original fix for broken backing pad
0.28mm layer hight, 2walls 7% gyroid infill everything is printable on one plate
Fits Breville 54mm portafilters
The only change is the tickness of the 2 front support that are now twice ticker. The orginal ones are too thin, hard to print and broke easly. Category: DIY
I had this little Polishing Machine but felt a bit flimsy and I wanted to make some attachments to it so I went ahead and rebuild it's enclosure and added a two way switch to spin it either way. All you need to build it is polisher itself…
A nail polisher stand that can be customized to fit the size you need. print the side 1 and 2 once each and as many stand body and rail as needed (they need to be glued together if more than 3 are used)
while slicing, printing and assamling some problems occurs, so i made some changes ... created some better flex foots .. Polisher-2.v3-foot_Flex_x4.stl closing holes in the model .. Polisher-4.v3-casing_b.stl gear is wobbeling, so i made…
Aircraft Powerglide floor cleaner / polisher battery holder Cut outs round the side of the holder still allow access to the battery vents which means it can be charged in the bracket. Top screw hole doesn't seems to print, I will try and…
needed a way to stop the drum bouncing off, designed for a paint can. 1x skateboard bearing ... 8mm inside diameter 1x 1 1/2 inch spring and some 3mm and 8mm bolts also i added spacers glued into the support wheel holes so i could use…
My father broke spout oil for his automatic shoe polisher. No replacement parts available ! instead of throw in the bin, i designed a new one :) ! Product characteristic: Tension : 220-240 V / 50 Hz Puissance : 100 W Vitesse de brossage :…
a mount for a small vevor polisher to mount it to the plastic shelf i use as a lapidary work surface. print out of the strongest materials you have and mount with some bolts
if you need to achieve a mirror finish on your parts after sanding, you need a dual action sander, this will remove swirl marks and hologram after sanding uses two mr128 bearings (12x8x3.5mm) (the ones the FBS 240 uses), one laptop m2.5…
bearing upgraded version: if you need to achieve a mirror finish on your parts after sanding, you need a dual action sander, this will remove swirl marks and hologram after sanding you will need a 3.2mm diameter 15mm long pin for assembly…
I needed a simple gridfinity bin that would fit my pen polisher laying down. I could only find models for a standing up version, so I created this laying down bin to hold the polisher and all it's bits, blades and the charging cable. I…
This is an improvement on my old model which was much bulkier and more uncomfortable to use. I found my last model to be really nice for the first grit but my hand would start to ache after a while so i made this smaller, softer and…
a mount for a small vevor polisher to mount it to the plastic shelf i use as a lapidary work surface. print out of the strongest materials you have and mount with some bolts
