Milwaukee M12 battery adapter for SPTA Cordless Mini Polisher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter allows the use of a Milwaukee M12 battery on an SPTA Cordless Mini Polisher.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 94
- Makes
- 1
- Views
- 436
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This adapter allows the use of a Milwaukee M12 battery on an SPTA Cordless Mini Polisher.
Required Hardware
3 - M3 button head socket screws - 18mm or 20mm long
3 - M3 heat-set threaded inserts
4 - 1/4" Male Spade Quick Splice Crimp Terminals 6.3mm Crimp Connector Non-Insulated
Print Settings
I printed with PLA or PETG. These are my standard print settings. The battery tabs are the design's weak point, so I printed that part at a 45-degree angle to avoid failure along the layer lines.
- Layer Height: 0.2 mm
- Walls: 4
- Top & Bottom Layers: 5
- Infill: Adaptive Cubic @ 40%
- Print Orientation: 45 degrees for SPTA_Battery_Adapter_Base_Final_V1.stl
- Tree Support
M18 Version
Here is the link to my Milwaukee M18 battery adapter for SPTA Cordless Mini Polisher.
