Milwaukee M12 battery adapter for SPTA Cordless Mini Polisher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows the use of a Milwaukee M12 battery on an SPTA Cordless Mini Polisher.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This adapter allows the use of a Milwaukee M12 battery on an SPTA Cordless Mini Polisher.
Required Hardware
3 - M3 button head socket screws - 18mm or 20mm long
3 - M3 heat-set threaded inserts
4 - 1/4" Male Spade Quick Splice Crimp Terminals 6.3mm Crimp Connector Non-Insulated
Print Settings
I printed with PLA or PETG. These are my standard print settings. The battery tabs are the design's weak point, so I printed that part at a 45-degree angle to avoid failure along the layer lines.
- Layer Height: 0.2 mm
- Walls: 4
- Top & Bottom Layers: 5
- Infill: Adaptive Cubic @ 40%
- Print Orientation: 45 degrees for SPTA_Battery_Adapter_Base_Final_V1.stl
- Tree Support
M18 Version
Here is the link to my Milwaukee M18 battery adapter for SPTA Cordless Mini Polisher.
