1 / 5
Auxiliary fan splitter switch (MTS-203 Housing DPDT ON/OFF/ON mini toggle switch)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I developed this project to split the power source from the auxiliary part cooling fan to my CCF when printing ABS/ASA
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)Powiązane
I developed this project to split the power source from the auxiliary part cooling fan to my Carbon Chamber Filter when printing ABS/ASA.
Required tools
- Soldering iron
- Heat set insert tip
Required hardware
- 1 M3 Heat set inserts (M3x5x4)
- 1 M3x6 SHCS
- 1 MTS-203 6-Pin 3 Position ON/Off/ON DPDT Mini Toggle Switch
- JST SM 2 Pin male and female connector with wire (for Creality K1)
Slicer settings
Filament: ASA
Nozzle: 0.4mm
Layer height: .2mm
Infill type: Gyroid
Infill percentage: 20%
Wall count: 3
Top/Bottom layer: 4







