1 / 5
Auxiliary fan splitter switch (MTS-203 Housing DPDT ON/OFF/ON mini toggle switch)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I developed this project to split the power source from the auxiliary part cooling fan to my CCF when printing ABS/ASA
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I developed this project to split the power source from the auxiliary part cooling fan to my Carbon Chamber Filter when printing ABS/ASA.
Required tools
- Soldering iron
- Heat set insert tip
Required hardware
- 1 M3 Heat set inserts (M3x5x4)
- 1 M3x6 SHCS
- 1 MTS-203 6-Pin 3 Position ON/Off/ON DPDT Mini Toggle Switch
- JST SM 2 Pin male and female connector with wire (for Creality K1)
Slicer settings
Filament: ASA
Nozzle: 0.4mm
Layer height: .2mm
Infill type: Gyroid
Infill percentage: 20%
Wall count: 3
Top/Bottom layer: 4







