1 / 7
Fridge Magnet with Loop (configurable in OpenSCAD)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fridge magnet that takes a 3mm by 12mm magnet and has a loop to tie or hook things.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- GNU General Public License v3.0
This a fridge magnet that takes a 3mm by 12mm magnet, and has a loop to tie or hook things. The hole is the right size for a KNEX bar, so those can also be used.
There are two pieces to print. I attached both the magnet and two printed pieces with super glue, and it worked quite well. I also printed with supports.
I made this in OpenSCAD with configurable parameters. The original OpenSCAD file is available on my GitHub:
https://github.com/ClassicAdam/configurable_fridge_magnet_openscad