1 / 7
Fridge Magnet with Loop (configurable in OpenSCAD)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fridge magnet that takes a 3mm by 12mm magnet and has a loop to tie or hook things.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- GNU General Public License v3.0
This a fridge magnet that takes a 3mm by 12mm magnet, and has a loop to tie or hook things. The hole is the right size for a KNEX bar, so those can also be used.
There are two pieces to print. I attached both the magnet and two printed pieces with super glue, and it worked quite well. I also printed with supports.
I made this in OpenSCAD with configurable parameters. The original OpenSCAD file is available on my GitHub:
https://github.com/ClassicAdam/configurable_fridge_magnet_openscad