Tablet/phone holder for mounting on 2020 extrusion (Ender 3 etc.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I mounted two of these on the top rail of my Ender 3 to hold an old Android tablet that I'm using as a control panel.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 549
- Wydruki
- 5
- Wyświetlenia
- 3421
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This provides a simple, slightly angled resting spot that fits a tablet device 10mm thick (or slightly over, but no more than 12mm) with at least a 10mm bezel around the screen (or else you'd be obscuring part of the screen).
You'll need an M4x12 screw and a matching tee nut in the extrusion to mount this. I have real steel tee nuts from Amazon, but printed plastic ones will probably work fine.
I tried to design this to be reasonably strong using the appropriate fillets and ribs, and not to have any fiddly critical dimensions, so I bet a wide variety of print settings and materials will work, but for what it's worth, I used 0.2mm layer height, 0.6mm nozzle, 15% infill, Hatchbox PLA at 205 degrees on an Ender 3 Pro running Klipper. The teardrop shape of the hole is so that you can print it without support.