IKEA Ribba WordClock 23x23cm ESP8266 WS2812B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The project uses the ESP32 WordClock software by SPSundTechnik.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Optimized Translation: WordClock 23x23cm IKEA Ribba Project
Required Materials:
23x23cm IKEA Ribba Frame
If you test it with the HOVSTA frame, please provide feedback.
ESP8266 NodeMCU
114x WS2812B RGB LEDs
(60 LEDs/m, self-adhesive)
30AWG Silicone Wire
MicroUSB Cable
5V 1A USB Power Supply
The letter plate might need to be mirrored during printing, depending on which surface you want as the front.
Software:
The project uses the ESP32 WordClock software by SPSundTechnik.
You can find the latest software version linked in the video description: https://bit.ly/3KlGIA3
Assembly Instructions:
Soldering the LED Strips
Connect the LED strips in series:
- The DOut (Data Out) of one strip connects to the DIn (Data In) of the next strip.
Connecting to the NodeMCU
- LED+ connects to the Vin output of the NodeMCU.
- LED GND connects to GND on the NodeMCU.
- LED Din connects to D6.
Level Shifter (Optional)
The LEDs work without a level shifter (3.3V to 5V) on the D6 output with this module and LEDs.
If you experience issues, consider using a level shifter.
DIY Inspiration:
Snappy DIY focuses on DIY projects, 3D printing, laser cutting, gadgets, FPV planes, and drones. Check out more: https://linktr.ee/snappydiy