ANGLE BRACKET - 35mm x 35mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An angle bracket for light duty, wherever something is needed to be held against something else, like a table top.
- Ocena
- 5 / 5
- Polubienia
- 172
- Pobrania
- 924
- Wydruki
- 15
- Wyświetlenia
- 2092
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a really simple, medium duty bracket. It will take a surprisingly large load but it should not be used in any situation where it is holding something UP. Holding things DOWN, like a table top, is fine.
In the photograph it is holding (locating) a heavy bench top onto it's base, and has proved reliable in that situation - the full weight of the bench can be lifted using only six brackets, but it never has any impact loads.
They ARE handy for many uses though!
EDIT - I've replaced the bracket pictured with a revised version which can be printed on its side without support to orient the print in an ever so slightly stronger way, but I do hope ultimate strength is not something you are hoping to test on a built piece!
