1 / 1
3 Spool (Un)original Prusa Drybox (For Pico MMU)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a 3 spool version of the drybox for the Pico MMU
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (17)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (18)Powiązane
NOT TESTED
Print out the 6002 bearings from here: Print in place bearings by Jerryie | Download free STL model | Printables.com
Glue the pin and hole rods together after installing bearings (glue bearings on, if desired)
Uses two 4mm round magnets (2mm width) for the door
Files attached outside of the assembly are the modified parts, print out the unmodified ones from the original model or the assembly file attached.
