PLA Plate for Scribing/Masking/Painting Practice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PLA Plate to practice techniques for model building and customization
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I modeled a tool for practicing scribing and painting techniques for model kit building and customization. I got the idea from this EA Gunpla video where he took a blank sheet of PLA plate and demonstrated some techniques. I've included 6 variations of my design and a blank sheet for you all to use to practice your skills.
The plates are 2mm. If you want to, you can make the Z smaller for a thinner plate. I printed these at 100% infill. I have not tested anything lower than that, as I'm not sure that anything other than a solid piece of plastic will perform properly for scribing. However, you could get away with 20% infill, or whatever you like, if you do not intend to scribe and just want to practice masking and airbrushing sections.
Just like with injection-molded model kits, you need to scribe, sand, and prime the surface before painting anything. Otherwise, your panel liner or paint could seep into the layers of the print. I haven't tested scratch-building with the blank plate, but it is not impossible if you print it thin enough.
Included STEP and Fusion files for remixing