1 / 3
Blushd = Blush + Lush Hybrid (Crush/Rush remixes) = Diana Mag Crush! — zdjęcie 1
1 / 3

Blushd = Blush + Lush Hybrid (Crush/Rush remixes) = Diana Mag Crush!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Blush/Crush but for the Diana mags using a merged Lush mag well

Ocena
0 / 5
Polubienia
7
Pobrania
45
Wydruki
0
Wyświetlenia
769
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Currently non-functional pending pusher updates. The Diana feed lips are much tighter than Talon mags. Will likely use ½" brass pusher.

 

Print all files from Blush except for Lower, Mid Body, Mag Release, and Ram Body. Print all three Lush Mag Release parts.
 

Hardware:
Lush Mag Release:  Uses 2x m2.6 nerf screws, and a m3x15 screw (with the existing mag release spring)


Blush Additional hardware:
qty 1: M3 x 8 for the fourth attachment point on the rear cap
qty 2: M3 x 12 (or longer) screws for adjustment wrench
qty 3: 6-32 x 11.1" threaded rod. Just buy a 12" piece and cut it down after things are threaded in. 
qty 5: m3 brass insert
qty 1: 60mm length of 9/16" brass.

qty 2-3: -016 o-ring for barrel sealing and alignment. 
qty 1: -113 o-ring for pusher seal. 

For remaining HW fallow Crush notes.

Tagi