1 / 7
Dust Hose Port for DIY Router Table Fence (fits regular Shop vac)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 45 degree dust collection port for every DIY router table fence to be used with a regular shop vac.
- Ocena
- 5 / 5
- Polubienia
- 228
- Pobrania
- 1450
- Wydruki
- 3
- Wyświetlenia
- 3675
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 7)Remiksy (0)Kolekcje (376)Powiązane
I built a DIY router table a while back and needed a connector for my regular old shop vac (I don't own a fancy dust extraction system with 100 mm hoses ;-)
The part prints without supports and can be screwed right into your fence without further sealing. I used eight 4x16 mm panhead wood screws which got me plenty holding power.
The hole for the vacuum hose is slightly tapered and should accept and securely hold any regular shop vac hose.
Happy printing :)