Weather Station Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for a weather station with e-ink display & ESP32
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 2457
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a complete case for the amazing github project https://github.com/lmarzen/esp32-weather-epd
You can use a 7.5" e-paper display from Waveshare or GooDisplay, both have the same size. I've added an Firebeetle ESP32 with HAT and a small 16850 Li-Ion Battery. Other batterys should fit too…
The goal was to design a slim case which follows the display line - so there is no print behind the display and it sits really good in there. There is a lid on top for closing the case & opening it for using the USB-C port. All my compontens are “thrown in” because its standing all the time and is not moved.
Please print the case on the small side with support for the top (see the picture).
___________________________________________________________________
Recommended print settings:
material: PLA is fine, Case~ 67g, Lid ~16g
resolution: 0.2mm
brim: recommended
infill: 10-15%
support: yes for Case
my printing time: Case ~3h , Lid ~25min