Fractal Design Meshify C front panel spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fractal Design Meshify C front panel spacer to allow moving fans out of the case to fit e.g. a GPU up to 340mm in length
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 81
- Wydruki
- 6
- Wyświetlenia
- 817
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
These two spacer bits allow fitting fans (up to 30mm in depth) outside of the Fractal Design Meshify C case without any gimmicks. No glue, magnets or such needed! Just slot in these pieces to have the mesh snap into its place naturally leaving space for your front fans or what have you.
I wanted to find a neat way to add spacers for the mesh without modifying the case itself. The existing solutions didn't quite cut it so took a stab at creating my own version. I think this does the trick and I hope you'll find it useful!
Even if I didn't need the space for the fans (or a longer GPU), I think the mesh being flush with the front panel still looks better.
Note: the front panel must be taken off to slot in the top spacer (it's a rather tight fit). The bottom spacer can be dropped in with the front panel in place.