1 / 1
Subaru WRX Shifter Turn-In Concepts Linkage Bushing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Subaru WRX Shifter Linkage Bushing
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you found this file helpful, please drop a boost for me over at makerworld!
https://makerworld.com/en/models/1031106#profileId-1013927
This was created for the turn in concepts shifter linkage, as the one that I had on my car had disintegrated.
This is meant to be a replacement as the turn in concepts shifter linkage is made to be serviceable and have the bushings replaceable.
While I'd recommend using TPU for something like this I had used ASA, and I'm not sure how long it will last so I can't recommend doing what I did.
