Foam AEBCore v.49 - CAD - By Thor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Currently, the AEB's (Automatic Electric Blasters) has become a great part of the community. Heres my take on an engine.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 913
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
AEBcore version 49:
This is my CAD for a 3D printable AEB-engine - Made for blasters with a stroke up to 10cm (Talon Claw T4 lenght)
This is ment to be an attachment to automaticly prime the blaster for you. It has a gear ratio of 80:1 (So divide RPM of the motor with 80 to get the darts per minute).
NOTICE: Gears must be printed at 0.1mm with full infill. This is because they'll be the ones taking a hit and this is the optimal settings for them to stand a chance.
This is a work in progress, but i simply dont have the time to print and test it out. If anyone cares to do so, please let me know of any mistakes and ill correct them.
BOM:
- 3s battery - 750mah or so
- 3s airsoft motor with a short shaft. Lower RPM = better
- 6 x MF85ZZ bearings
- 3 x 5mm thick metal shafts, 42mm long
- 12 x 40mm M3 flathead screws for the shell
-1 x 15mm M3 flathead screw for the anti-reversal latch
-6 x M2 0.4 5mm flathead screws long for batterylid
- two ballpin springs for the anti-reversal latch and the battery lid
- Return spring 6mm diameter max
- 2 small limit switches - One for the anti-reversal latch and one for the catch on the main blaster.
I hope you will enjoy it as much as I've enjoyed drawing it up! Let me know if i can improve anything design-wise.
Cheers
//Thor
Discord:
https://discord.gg/tRbzzAj2CA