Raspberry Pi Camera 3 holder - snap fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A protective case for your v3 Pi cam that snaps together with no additional hardware, and can be mounted anywhere.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 397
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a quality case/holder/mount/enclosure for the version 3 Raspberry Pi Camera. It snaps together with no additional hardware, screws, or glue.
I printed the case in Polymaker Polylite PETG. I recommend printing in some sort of PETG or other similar non-brittle material. PLA could work, but is not recommended. The snap-fit clips are a bit thin (~1.5mm) so you need a pretty well tuned printer. The case printed great on my Prusa MK4S.
This model has only been tested with and was designed for the Pi cam v3. I cannot guarantee compatibility with other versions.
I designed this model for mounting my Pi cam v3 in my custom enclosure for print monitoring via Prusa Connect. I had to make a “shim” of sorts that angles the camera 15 degrees, this was an afterthought (as you will be able to tell if you remix it using the Fusion360 file 😅) and is optional.
P.S. - I was going to add my print files, but Printables didn't like the custom gcode I have in them to control my enclosure. \_(ツ)_/