1 / 3
Annex Belay for RatRig V-Core 4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapted the Annex Engineering Belay system to be easily integrated into a VC4
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 820
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (42)Powiązane
Please refer to the Annex Engineering Documentation at Github for how to set up Belay: https://github.com/Annex-Engineering/Belay
This remix allows for a more direct integration into a RatRig V-Core 4. The components are:
- Belay Frame Mount - bolts into place just like the stock PTFE filament guide. Install 2 M3 heatset inserts into the bottom of this so the Belay Main Section can bolt to this.
- Belay Main Section - using 2x M3x8 bolts to bolt it to the Frame Mount as seen in photos.
- Orbiter 2.0 Adapter Plate - holds the Orbiter 2.0 (or 2.5) to the frame. This requires two M3 heatset inserts in the two holes next to where the filament comes out from the extruder, which is where you bolt the extruder down to this plate. Then install an M10 pneumatic fitting to serve as a PTFE guide. This part does require supports to print.
Then you will also need the stock Annex parts that are the slider and cover. Annex documentation explains how it assembles, is wired, and how to set it up on your machine.