1 / 9
3d printed version of 76 Special (scaled up) - RC airplane
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scaled up and 3d printed version of 76 Special (Friday Night Special) https://outerzone.co.uk/plan_details.asp?ID=9210
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 893
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (44)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (25)Powiązane
There are two version of this one with a T tail and one with traditional inline tail. I printed tail and wings at 2 wall and 3% gyroid .
fuse was printed in vase mode
Man this was a fast model !
running on DYS X3115 900kv motor with a 10x4.5 prop on 6S 5000mah battery.
AUW - 2Kg (2000gm)
Filament - Lw - pla
Span: 52 inches ( I think - cant remember but it was in the range of 50-55inches)
Fiberglass with a 50GSM cloth for extra strength.
