3030 - V-Core4 Door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Door Hinge Design for V-Core 4 Front Panel
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 466
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a door on my V-Core 4 instead of having to lift the front panel away everytime a print is finished.
Most Designs need some adjustment on the side panels as well.
My Design only needs new front panels. Rest stays the same.
Part List is for a V-Core 4 300. Used 4mm PC Panels.
For the other V-Core Sizes you just need to adjust the door Panel Size. Parts should work the same.
Holds shut by 2 Magnets on top and 1 Magnet on bottom.
All printed parts are PETG
0,2mm Layer Height
4 Walls
25% Infill
Used some minor supports on the frame part to get a nice screw hole.
Part List Hinges:
| Amount | Size | Part | Link |
|---|---|---|---|
| 6 | - | Frame Part | Printed |
| 6 | - | Door Part | Printed |
| 6 | M6x12 | Cap Head Screw | from RatRig Package |
| 6 | M6 | T-Nut 3030 | from RatRig Package |
| 6 | M3x50 | Cap Head Screw | https://www.amazon.de/sourcing-map-Gewinde-Innensechskant-Kopfschrauben/dp/B01FL88I36 |
| 12 | M3x4 | Heat Insert | https://www.amazon.de/ruthex-Gewindeeinsatz-St%C3%BCck-Gewindebuchsen-Kunststoffteile/dp/B09ZHSGHXD |
| 12 | M3x8 | Screw | https://www.amazon.de/sourcing-map-Legierung-Schraube-Sechskantschraube/dp/B0143GZJI4 |
| 12 | M3 | Washer | https://www.amazon.de/Unterlegscheiben-Beilagscheiben-Edelstahl-Karosseriescheiben-Gewindestange/dp/B0D95V4Z8F |
Part List Handle:
| Amount | Size | Part | Link |
|---|---|---|---|
| 2 | - | Alu Door Handle | from RatRig Package |
| 4 | M6x16 | Cap Head Screw | from RatRig Package |
| 4 | M6 | Locking Nut | from RatRig Package |
| 4 | M6 | Washer | from RatRig Package |
Part List Magnet Holder
| Amount | Size | Part | Link |
|---|---|---|---|
| 4 | - | VC4 Magnet Panel | from RatRig Package |
| 2 | - | VC4 Magnet Frame | from RatRig Package |
| 1 | - | Magnet Holder Bottom | Printed |
| 10 | M6x12 | Cap Head Screw | from RatRig Package |
| 8 | M6 | Locking Nut | from RatRig Package |
| 8 | M6 | Washer | from RatRig Package |
| 12 | 10x4 | Magnet Neodym disc | from RatRig Package |
| 2 | M6 | T-Nut 3030 | from RatRig Package |
| - | - | Glue for bottom Magnet Holder | - |
Door:
2x VC4 300 Door - see DXF File
Took some inspiration from the 2020 hinge from @nwhirschfeld
https://www.printables.com/model/111435-door-hinge-for-2020-profiles