1 / 1
KMM Handheld Car Vacuum Cleaner & Air Duster 9" Crevice Nozzle Tool — zdjęcie 1

KMM Handheld Car Vacuum Cleaner & Air Duster 9" Crevice Nozzle Tool

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Long crevice tool compatible with the KMM Handheld Car Vaccum from Amazon

Ocena
0 / 5
Polubienia
8
Pobrania
97
Wydruki
0
Wyświetlenia
511
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

I needed a longer tool for my small vacuum to reach into the corners of my 3D Printer :) I used a customizer on Thingiverse to create this.

The exact vacuum can be found on Amazon by searching "KMM Handheld Car Vacuum Cleaner, 9000Pa Vacuum Cleaner and Air Duster" If the fitment is too tight, use sand paper on the part that connects into the vacuum. You can also feel free to use the customizer linked down below to easily create your own custom tool.

Print Settings:

Brim: Outer brim
Layer Height: .2-.3
Material: PETG will give better results than PLA as it's less brittle, but PLA should still work fine.
Supports: No supports required.

If the fitment

Customized version of https://www.thingiverse.com/thing:1571860

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1571860

Instructions

 

Using the following options:

Base_Diameter = 21.7
Base_Overlap = 35
Base_Chamfer_Length = 55
Base_Thickness = 2.1
Nozzle_Length = 228
Nozzle_Outer_A = 20
Nozzle_Outer_B = 10
Nozzle_Fillet_Radius = 3
Nozzle_Thickness = 2.1
Nozzle_Chamfer_A = 16
Nozzle_Chamfer_B = 15

 


 

Tagi