6in Lathe Chuck Soft Jaw Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Form copper soft jaws on a 20mm wide jaw for holding soft parts with a 3 or 4 jaw chuck
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 977
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I have a set of 6in 3 and 4 jaw chucks from precision matthews. The jaws are 20mm wide each and are pretty similar. I suspect it will work for most chucks in that size. the 4 jaw has 90 degree cuts and the 3 jaw has 120 so they all come together correctly.
I included a cut template to help get the copper right to start with. I used a metal bandsaw and 1mm thick copper sheeting. You could go thinner, but I wouldn't want any thicker. Use the form to fold the T shape around the individual jaw, then use a little hammer to fold the tabs over.
I suggest printing these things pretty stout. I used PLA, 4 layers, and about 25% infill. I made 5 or 6 inserts for my 4 jaw and the form is still in good shape.