Phone Holder Wall Mount (w charge cable keeper)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall-mount phone holder that can accommodate a smart phone in its case, and keeps the charging cable handy.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 483
- Wydruki
- 3
- Wyświetlenia
- 1143
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I often leave my phone in my workshop or office and forget where it is, and have to search around. I explored various wall-mounts but nothing really spoke to me. A particular issue is that I keep my smartphone in a leather-ish case, so it's thicker than many will accommodate.
Starting with Tazik's simple phone-holder shape, I simplified the mesh a bit, and applied chamfers to the edges for a clean print. I grew the interior depth, thinned the walls substantially, and knocked out many cutouts to reduce the amount of material needed for a good print (less than 50g now). As well, I added wall-mount screw holes to allow twist adjustment for a nice level presentation, and then added a cable-holder to the side that should accept most USB-C cables to keep them handy for use while the phone is in the holder.
Not much left of the original design - but thanks to Tazik for the great starting point regardless.
An added benefit is that with a lower front and holes you can see more of the screen, so if you want to mount the phone in the on-state for some notes or video while working, you can do that too.
There's a bit of play in both directions, so the interior dimensions of 90mm x 24mm should be suitable for a wide range of smart phones.