Cover inspection flap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a cover to open an inspection flap. It also operates the door lock.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a cover for an inspection flap which hides the water cutoff valves. It also operates the door lock.
I have to open it every week for closing/opening the valves, so instead of removing a rubber cover and use a tool, now it is 2 in 1.
As you can see in the attached graphic of the measurements, it is designed for a 19 mm hole. The square bolt has 8 mm side lenght, the steel door has a thickness of 2 mm.
Opening and closing the lock leaves marks on the door, so I hope this can be avoided once the wall has been repainted.