1 / 14
CR10/Ender 3 Fanduct V4 for MicroSwiss DirectDrive (Dual 40mm Part Cooling) — zdjęcie 1
1 / 14

CR10/Ender 3 Fanduct V4 for MicroSwiss DirectDrive (Dual 40mm Part Cooling)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a new reworked version of my original CR10/Ender3 MicroSwiss DirectDrive Fanduct

Ocena
0 / 5
Polubienia
10
Pobrania
47
Wydruki
1
Wyświetlenia
753
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a new reworked version of my original CR10/Ender3 MicroSwiss DirectDrive Fanduct: https://www.thingiverse.com/thing:4277669
.
.
.
The new versions have a few key differences to my first approach:
.
.
V4.0: (DISCONTINUED)
.
-Modular design to take my Combined Universal BLTouch/Probe mount: https://www.thingiverse.com/thing:4856597
.
-Updated measurements based on my Fusion360 model of the MicroSwiss DirectDrive: https://www.thingiverse.com/thing:4791971
.
-Removable Cable Guide to organize the cables with zip ties
.
.
.
V4.1: (Includes all features from V4.0)
.
-More compact design, but probe positions had to move further away from the nozzle
.
-Bigger opening at the bottom of the duct to prioritize air flow over air pressure
.
-Relocated some screw locations to allow for easier (dis-)assembly
.
-Rounded edges at the back of the cable guide to allow better fitment with cable ties
.
-This version can still be fully printed without the need for any supports when located with the back side down on the bed!
.
-The Front Fan Adapter V4_1_1 has a slight design improvement to focus the airflow more onto the actual heatsink.
.
-The Front Fan Adapter V4_1_2 now also includes a second position for mounting a BLTouch!
.
.
.
V4.2_TI: Reworked Design to be installed using threaded inserts (Includes all features from V4.1)
.
-The 3DO_NC version of the Front Fan Adapter_V4_2_TI now also includes mounts for a 3DO nozzle cam with two of their 5050 SK6812 WWCW 6000K LEDs
.
-The PCB mounting holes on that version are designed for the 2*10mm SHCS screws included in the complete kit which you can be find at:
https://3do.eu/nozzle-camera/763-1161-3do-nozzle-camera.html
.
.
.
.
.
GENERAL INFORMATION FOR ALL VERSIONS:
.
All mechanical connections are to be made using standard M3 screws.
I recommend using washers with the two screws securing the fan duct to the aluminium MicroSwiss plate.
.
.
.
The XY-Offsets can be adjusted to fit this design sending the following commands followed by an M500:
.
.
V4.0:
BLTouch: M851 X-44.87 Y-37.402
18mm probes: M851 X-37.263 Y-53.716
.
V4.1 and V4.1.1: 
BLTouch: M851 X-48.467 Y-46.252
.
.
ALL FUTURE 18MM PROBE MOUNTS (starting with V4.1) USE:
M851 X-40.86 Y-62.565
.
.
V4.1.2:
Additional BLTouch mount: M851 X33.032 Y-36.249
.
V4.2_TI and V4.2_TI_3DO_NC:
Additional BLTouch mount: M851 X34.111 Y-36.249
.
.
 

Print Settings

Printer Brand:

Creality

 

Printer: 

CR-10

Rafts:

 

No

 

Supports: 

No

Resolution:

 

0.2mm

 

Infill: 

15-20%


Filament:
Amazon Basics PETG Blue 
 

Notes: 

0.4mm nozzle

 

 

 

 

Category: 3D Printer Accessories

Tagi