CR10/Ender 3 Fanduct V4 for MicroSwiss DirectDrive (Dual 40mm Part Cooling)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a new reworked version of my original CR10/Ender3 MicroSwiss DirectDrive Fanduct
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 46
- Makes
- 1
- Views
- 749
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a new reworked version of my original CR10/Ender3 MicroSwiss DirectDrive Fanduct: https://www.thingiverse.com/thing:4277669
.
.
.
The new versions have a few key differences to my first approach:
.
.
V4.0: (DISCONTINUED)
.
-Modular design to take my Combined Universal BLTouch/Probe mount: https://www.thingiverse.com/thing:4856597
.
-Updated measurements based on my Fusion360 model of the MicroSwiss DirectDrive: https://www.thingiverse.com/thing:4791971
.
-Removable Cable Guide to organize the cables with zip ties
.
.
.
V4.1: (Includes all features from V4.0)
.
-More compact design, but probe positions had to move further away from the nozzle
.
-Bigger opening at the bottom of the duct to prioritize air flow over air pressure
.
-Relocated some screw locations to allow for easier (dis-)assembly
.
-Rounded edges at the back of the cable guide to allow better fitment with cable ties
.
-This version can still be fully printed without the need for any supports when located with the back side down on the bed!
.
-The Front Fan Adapter V4_1_1 has a slight design improvement to focus the airflow more onto the actual heatsink.
.
-The Front Fan Adapter V4_1_2 now also includes a second position for mounting a BLTouch!
.
.
.
V4.2_TI: Reworked Design to be installed using threaded inserts (Includes all features from V4.1)
.
-The 3DO_NC version of the Front Fan Adapter_V4_2_TI now also includes mounts for a 3DO nozzle cam with two of their 5050 SK6812 WWCW 6000K LEDs
.
-The PCB mounting holes on that version are designed for the 2*10mm SHCS screws included in the complete kit which you can be find at:
https://3do.eu/nozzle-camera/763-1161-3do-nozzle-camera.html
.
.
.
.
.
GENERAL INFORMATION FOR ALL VERSIONS:
.
All mechanical connections are to be made using standard M3 screws.
I recommend using washers with the two screws securing the fan duct to the aluminium MicroSwiss plate.
.
.
.
The XY-Offsets can be adjusted to fit this design sending the following commands followed by an M500:
.
.
V4.0:
BLTouch: M851 X-44.87 Y-37.402
18mm probes: M851 X-37.263 Y-53.716
.
V4.1 and V4.1.1:
BLTouch: M851 X-48.467 Y-46.252
.
.
ALL FUTURE 18MM PROBE MOUNTS (starting with V4.1) USE:
M851 X-40.86 Y-62.565
.
.
V4.1.2:
Additional BLTouch mount: M851 X33.032 Y-36.249
.
V4.2_TI and V4.2_TI_3DO_NC:
Additional BLTouch mount: M851 X34.111 Y-36.249
.
.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15-20%
Filament:
Amazon Basics PETG Blue
Notes:
0.4mm nozzle
Category: 3D Printer Accessories