mammoth-3D CPAP Muffler Mods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various Mods for the Mammoth-3D CPAP Muffler
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 586
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview:
I've been making a few modifications for the grills used by Mammoth-3D CPAP Muffler. I decided to compile them all in one place and to also include some future modifications I am planning.
Details:
Carabiner Grill: This will allow you to run the harness for Carabiner PCB (or XOL PCB) through the muffler grill without de-pinning the connector. It includes a hole for the PTFE with the ability to use an ECAS04 fitting. There is also an option for including the Beacon cable. The clip will need 2x M3 heatset inserts and 2x M3x10mm SHCS along with an optional cable tie.
Centering Grill: This is a minimalist grill, it only support CPAP and nothing else. But it'll center the whole muffler assembly on the back of the printer. This is useful if you're planning to mount other things to the printer, I used this when mounting my buffers.
Extras:
I needed to add all of the original muffler files as I built these mods off of them and I want to ensure they stay available for anyone wanting my mods. These are a snapshot from the time I made my mods so I can not guarantee newer versions of the muffler won't break compatibility.