Cateye bike tail light adapter to use original seatpost clamp with Topeak rack mounting holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original Cateye clamp has the quick release for the light already. So I created an adapter to use that.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
The original Cateye clamp has the quick release for the light already. So I created an adapter to use that by creating a very short cylinder for the clamp to fit on and then a slightly offset tab that accepts a bolt and not to attach to the Topeak rack. I used a pin for the bottom hole because there was not enough room to put another tab with counterbore.
The first print was with PETG at default 15% infill. That busted off at the top tab that connected to the cylinder. My next print was at 40% infill and with NylonX from MatterHackers. TPU at a high infill would likely work good and will be my next choice if the NylonX breaks.