Cateye bike tail light adapter to use original seatpost clamp with Topeak rack mounting holes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original Cateye clamp has the quick release for the light already. So I created an adapter to use that.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
The original Cateye clamp has the quick release for the light already. So I created an adapter to use that by creating a very short cylinder for the clamp to fit on and then a slightly offset tab that accepts a bolt and not to attach to the Topeak rack. I used a pin for the bottom hole because there was not enough room to put another tab with counterbore.
The first print was with PETG at default 15% infill. That busted off at the top tab that connected to the cylinder. My next print was at 40% infill and with NylonX from MatterHackers. TPU at a high infill would likely work good and will be my next choice if the NylonX breaks.