Counting matching models…
Being short and unable to mount a varia to my bike with a saddle bag attached I decided to create the following solution. This uses hardware included in the Varia and topeak kit. this might fit other topeak bags if the mounting system is…
Modified the sled openscad file from jridley's design so that instead of using nuts and bolts, I could drill out holes for zipties (sort of like this approach https://www.youtube.com/watch?v=MvBx_74FzUk ). I haven't looked at jridley's…
I like the Topeak Smartgauge D2 and have one in each car and one in the workshop. Since I always check the MTB tire pressures before we ride, it's good to keep it handy. I had just been keeping it in the back of the car, but realized I…
Modifications: * Shorter saddle rail clamps * Longer neck * Cutout to allow saddle move further to the front * Smaller nut holes. Nuts rotated in holes of original model size. * Holder wall that click mechanism grabs is more narrow, so no…
2024-05-20 update: see improved model here Relatively permanent mount on the rear saddle rails for Topeak QuickClick compatible saddle bags. I made two versions: one flat (original design), & one round so you can slide the whole mount…
Wandhalterung für eine Topeak JoeBlow Sport III Standpumpe. Damit kann die Luftpumpe an die Wand gehängt und der meist ohnehin schon begrenzte Platz in der Fahrradwerkstatt besser ausgenutzt werden. Außerdem hat sie ihren wohlverdienten…
This is a case for the Topeak SMARTGAUGE D2 digital gauge. IMPORTANT : There are versions for the new and old versions of the Topeak SMARTGAUGE. The old version of the gauge fits in the new version of the case!!! The only difference…
QuickClick mount for racing type saddles. For Topeak Wedge Bags. This has been remixed so it mounts further back on the seat rails. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 200…
I made this adapter so I can keep using the Ridecase mount on my bike and still change devices. I simply attach it to a spare case for a phone or device with some good 3M double sided tape and it is strong. I recommend printing in Nylon…
This spacer allows you to mount standard side bags on your rack. Print with No Support PLA
I bought a Topeak Omni Quicktrack adapter for my Aventon Level .2 bike, the supplied clips aren't wide enough for the Aventon rack. I tried printing these in PLA and PETG, and they both snapped after a few bumpy rides. Reprinted in ASA…
Universal base with allow you connect something (bag, tools etc) to Topeak QuickClick mount.
This is a simple Mount for my Garmin Varia Taillight. The insert is a Garmin Part.
This mini ratchet is sold by Topeak and O'Reilly Auto (branded Power Torque). This 5 hex bit holder is printed from TPU and clips onto the handle of the ratchet. If you use short bits, two holders with a total of 10 bits clip onto the…
Just stick it to the quickclick and you're good to go. Printed in extrudr PETG with one layer grey for the logo. No Supports needed. Edit 07.08.2023: added a step- and stl-file without a logo
I have always wanted to mount these NiteRider tail lights on the back of my Topeak rack. The provided seatpost mount is always blocked if I have anything substantial on top of the rack. These are both very popular brands in their…
My wife and I recently purchased a milk crate from Fred Meyer : https://www.fredmeyer.com/p/sterilite-plastic-black-storage-box-milk-crate-containers-home-6-pack-/0074427132996?fulfillment=SHIP&searchType=default_search for our radrover…
Sparepart for the "Spacer" for the "Frontloader" (handlebar bag) from Topeak. The part ist used to adjust the distance between the handlebar and the bag. In oder to be more flexible, I made two different versions: standard version as it…
I love the Asssaver from 3DBen, but with a full-suspension bike and a dropper post, i trashed two of those puppies while jumping with the dropper post set down. It wobbled a little too much and one time it just snapped, the second time it…
ABS/PC or another strong filament and 100% infill req.
Simple clamp mount for a Garmin Varia RTL515 quarter turn, using the original insert that comes with the light, a few M3 screws and some heat inserts. Has a 10 degree rake on the stay to suit the rear tube on a Topeak Super Tourist, as i…
This is a spacer made from flexible filament for my Rose backroad and Topeak frontloader. This part makes space for the brake line and the shift cable at the handlebar. It fits to the original Topeak spacers. Maybe it is possible to use…
Since mit seatpost has a pretty odd aero shape, I needed to modify the mount to be a bit further back und down.
Topeak Prepstand Elite/Pro bike repair stand replacement parts for rotating arm Background My Topeak bike repair stand has been of great use for me for over a decade now. Consequently, the interlocking teeth of the rotating mechanism are…
I used it to attach an Abus lock to MTX rail.
Print in PETG with 3 walls or more. Should fit many other rear lights with standard mounting. Should fit other Topeak bike racks as well. Secure with two 5mm bolts with nut and washer.
Some Bontrager saddles feature 2 M5 tapped holes, which is nice for mounting all sorts of things. Here is Bontrager Blendr Saddle Accessory Mount which uses these hardpoints. I have a Topeak saddle bag which I wanted to mount. Because I…
Just print and replace SelleRoyal mounting system with this one. No modification to the saddle needed. Uses original screws. 20 degree angle version is recommended (SelleRoyal_topeak-20.stl) Tested only with SELLEROYAL SCIENTIA ATHLETIC…
This adapter allows a Topeak Quicktrack rail to be mounted to an Aventon Pace bicycle rack, since the original mounting brackets weren't wide enough for this rack. Note that I used heat-set inserts (M6*8*8) along with longer screws…
Have a older Topeak MTX1.0 rack but want to use a MTX2.0 accessory? This adapter plate lets you use MTX2.0 on older racks. Older 1.0 racks have a ramp that don't allow the MTX2.0 latch to stay latched. This adds a flat surface so MTX2.0…
Since I tend to break the snap-in part of the bag on my montainbike, I decided to design a spare part by myself. This is a spare part for the Topeak MTX Quicktrack system supporting a lot of bags. Usually the hook breaks when you are in a…
so I originally printed the Topeak rail from here: https://www.thingiverse.com/thing:4438950 But I needed holders for the panniers that come out of it, so I added some attachment points where the rear rack attaches. You'll have to mirror…
This is an adapter for permanent or temporary mounting of the Topeak Redlite Mega tail light to Topeak racks. It's anchored by two M5 screws, fits very well (at least on my printer) and even has some theft protection with the optional…
2 pieces of my MTB mudguard were broken so I modeled new ones.
I improve the original design to use without the neoprene bag for my new Wolftooth 8-Bit Pack Pliers. This organizer has combined 12 items plus a multitool with 17 functions in one piece, including: 1x Wolftooth 8-Bit Pack Pliers (17…
Included slicer files have reinforced infill in most strained places.
Replacement shoe base for TOPEAK MINI MORPH Pump https://www.topeak.com/global/en/products/mini-pumps/248-mini-morph%C2%AE I lost the original shoe base so I created a replacement. You need to make a hole for the screw (you need to use a…
The small washer is used several times on the prep stand
Hey all! Here's an enclosure I built to conceal an AirTag in the Topeak DP mount. As I do a lot of bikepacking with my trusty & precious gravel bike, I wanted to be able to track it. It's a pretty good place to conceal the airtag as it is…
This is an adapter that allows you to mount vertically the Olight / Magicshine Seemee 30 on a Topear Explorer rear rack. Use zip ties to mount it on the rack.
This simple tool allows you to lock your QuickTrack saddle bags on the panniers. A luggage lock can be used to secure it. Prints upright without any supports
Join together using M4 screw and captive nut. Print with supports. Topeak clip prints best up the way it attaches to the saddle. Cyglolite Hotshot clip prints best with the clip facing the bed and the pivot at the top.
Recently got a Topeak Beamrack, which now blocks the Cyglolite Hotshot that is normally mounted on the seatpost. Found this (https://www.thingiverse.com/thing:2620379/files - Deckel.stl) and could have used some hardware to fit Aiber's…
A small AirTag holder meant to mount under the Topeak Super Tourist and similar bikeracks. Should fit other bikeracks with 38mm hole spacing and 5mm screws. First attempt at threads, but they seem to fit nicely. Printed on a MK3S+ Using:…
Print in TPU. Fits tight if printed in hard TPU.
As i thought that the bag/holder that came with the tool was a bit bulky, i designed this smaller holder. The bits should have a snug fit that makes them stay in place. Printed with 4mm nozzle PETG.
Long sadle bag holder for Topeak QuickClick bag with Topeak Flash Fender mount
The original Cateye clamp has the quick release for the light already. So I created an adapter to use that by creating a very short cylinder for the clamp to fit on and then a slightly offset tab that accepts a bolt and not to attach to…
The factory mount for my bike pump stopped holding it securely, so I created a replica and modified it to print without supports. Designed for the Topeak Road Morph, but it should fit anything with a 23.5mm outer diameter.
Just a simple wall mount for the Topeak D2X. Uses 2 screws to attach to the wall, feel free to remix this for use with a pegboard.
This Magicshine backpack clip adapter is designed for use with the included Seemee 300 Saddle Rail Adapter. Remix from original part posted by @Gmorula_2201249 with 110 degrees angle vs 125 degrees from his original version that makes the…
Allows me to mount Iphone 6 in topeak weatherproof case on any go pro mount for filming cycle rides in 240 frame HD makes go pro look second best. Make sure you remove supports particularly tiny piece between mounts. Instructions Created…
Replacement part for the Tetrafender G1 front mudguard. Just use the original metal half-rounded screw nut as seen in the picture. It's the right one. If you need the other side, just mirror the part in your Slicer.
Pokud Vám Vaše podsedlová brašna TOPEAK DYNAPACK při jízdě naráží do zadní pneumatiky a dochází k poškrábání je možné upnutí této brašny nadzvednout pomocí mé flexibilní úhlové vložky. použití vložky je vhodné především pro celoodpružená…
I made this bracket to attach Topeak handlebar bags to my ICE Sprint Trike 12mm cycle racks. On my short rides I don't want to use my big panniers, and would prefer to use my smaller Topeak handlebar bag. This quick remove bracket fits…
Oberrohrtaschen Versteifung für Topeak FASTFUEL DRYBAG II Oberrohrtasche
See remix changes. This remix worked perfectly for my particular mount (the Topeak UTF Multi-Mount ). Printed in ASA which is working very well so far. Note: this mount adapter was originally designed for the Karoo 2 but works perfectly…
This is a simple adapter to mount your Garmin Varia or Magene L508 to your Topeak Zi:RAK (currently only tested with Magene L508). To completely assemble this mount you need a Garmin mount plate (I used these ) 2x 5x5.8 threaded inserts…
pin_top_v12.stl has a captive nut. You must pause the print after the captive part has printed and install a M4 nut. I wanted a plate for my topeak mtx rack that I could bolt custom experiments on but still remove easily. 2020 seemed like…
This is an angle lock / position retaining insert for Topeak UTF mounts. I really like this compact mount, but my setup (bike computer + headlight) turned out to be too heavy. The stock bolts couldn't hold the tilt angle under load,…
Do you have a tesco crate box hanging around that is not finding any use? Do you ALSO have a bike with a topeak pannier rack on? Well do I have news for you my friend, with this nifty device you can turn your old green box into your BRAND…
A storage box for holding straps. Designed to fit into a Topeak Super Tourist DX Disc Pannier Rack. Part List 4 m3x12mm machine screws 4 m3 nuts 4 cables ties 31/01/2026 V1 : Edited shutter box to fit into the square space between the…
Have a older Topeak MTX1.0 rack but want to use a MTX2.0 accessory? This adapter plate lets you use MTX2.0 on older racks. Older 1.0 racks have a ramp that don't allow the MTX2.0 latch to stay latched. This adds a flat surface so MTX2.0…
As i thought that the bag/holder that came with the tool was a bit bulky, i designed this smaller holder. The bits should have a snug fit that makes them stay in place. Printed with 4mm nozzle PETG.
I love the Asssaver from 3DBen, but with a full-suspension bike and a dropper post, i trashed two of those puppies while jumping with the dropper post set down. It wobbled a little too much and one time it just snapped, the second time it…
This holder allow you use Garmin Varia with Topeak sadle bag.
The screw cap that retains the valve head (where the valve connects) fell off my Topeak Pocket Rocket bicycle pump. This made me sad, as it is a good pump. I made this part to replace it, including the internal thread which is a bit of a…
This part converts most pannier racks into a topeak pannier rack. I have a bike with a topeak pannier and topeak bag, but it would be nice to be able to use the bag on other bikes without having to buy another topeak pannier rack/ redo…
A QuickTrack rail for Topeak Panniers with clip. I have a spring loaded pannier on my commuter bike with a large bag. On another bike I have a Topeak Uni Explorer pannier rack which fits a trunkbag which can hold 30L but doesn't hold as…
On my semi integrated stem/handlebar combination, the brake hoses run a short length under the handlebar before going into the stem. If anybody wants to mount an out-the-front mount under the stem for the Garmin Edge and a GoPro like my…
Do you have a tesco crate box hanging around that is not finding any use? Do you ALSO have a bike with a topeak pannier rack on? Well do I have news for you my friend, with this nifty device you can turn your old green box into your BRAND…
A pretty simple design for mounting your own basket or bag to a Topeak bike rack in a simple and easily removable way. The design uses the flex of the plastic instead of the spring like the first party accessories, but holds pretty well.…
If you want to attach a bicycle rear light to Dynapack mount, this is the solution! Print instructions Category: Sport & Outdoors Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Notes: In the slicer,…
I own a Topeak Handlebar Bag that attaches to my bike via a sturdy plastic mount on my bike's handlebars. Since I really only use that bag when bike touring, why not use the clip as a mount for my Gopro when I'm commuting to and from…
I own a Topeak Handlebar Bag that attaches to my bike via a sturdy plastic mount on my bike's handlebars. Since I really only use that bag when bike touring, why not use the clip as a mount for my Gopro when I'm commuting to and from…
An inline mount for the Topeak Mountain TT pump. The standard bracket is design to offset it to the side of a bottle cage. Dpedning on your setup you may not want this or want to mount to a top tube where the offset causes it to hit your…
This is a front lights holder for Topeak's Fixer 8 accessory. It is printed as two parts, which can be glued together. Be sure to glue parts when they are uninstalled from Fixer 8, so both legs can be placed closer together (move inwards…
Topeak TetraRack R2 Rear Bike Rack The mounting holes are designed according to this rear basket from Amazon: https://www.amazon.com.tr/dp/B0BTPH3FS8 I added two types of front lockers: one is attached to the rack, and the other is…
Maybe a little niche... I like the Topeak case and bike mount, and use my phone for shorter bike trips, but battery life is not good enough for my longer rides. And I prefer the display and functionality of my Coros cycle computer for…
A storage box for holding straps. Designed to fit into a Topeak Super Tourist DX Disc Pannier Rack. Part List 4 m3x12mm machine screws 4 m3 nuts 4 cables ties 31/01/2026 V1 : Edited shutter box to fit into the square space between the…
The original fender of the aluminum fender for the Topeak Tetrarack is quite short so I created this extended version of the plastic piece. The attatched openscad file has the parameter "angle" which you can use to change the length of…
This is a replacement for a topeak smartguage CR2032 battery door, print it flat on its back with tree supports
Black plastic holder for red reflector for Topeak MTX Beamrack bike carrier. Černý plastový držák červené odrazky na cyklonosič Topeak MTX Beamrack.
Uses the clip-in mount that is included with the pump and encloses the pump to protect from the elements. Top and bottom snap together with small clips on either end and there is a slot and recess for a strap to ensure the lid stays put.…
Topeak handlebar bag wall mount. Category: Sport & Outdoors
Box for the Topeak Ratchet Rocket Lite DX + Bit Extension Open Version for easy access at the bottom Closed Version for tight sit and more protection Category: Tool Holders & Boxes
This a belt clip for the Topeak Ratchet Rocket, specifically with the plastic case: https://www.amazon.com/Topeak-Ratchet-Rocket/dp/B01GS9ADF8 This is a CNC/machining/metal CAD. The holes will not be dimensionally correct through 3D…
Universal rear light mount for a Topeak TetraRack M2. I didn't like the original cateye mount, and wanted to use my own light, while retaining original hardware. So here we are! Hardware to assemble: 2x M4x12mm screws, washers, nuts. The…
Mount for rear light to a Topeak Beam Rack RX. Category: Sport & Outdoors
I bought a Topeak ESCAPE POD S/M tool bottle since it has a sock to eliminate rattle noises that regular tool bottles always have. Then I design this organizer that can fit in the socks and slide in and out the tool bottle easily. the…
My Topeak ratchet tool set was loosing bits from its original holster all the time. Therefor I have designed insert for Rugged box from MR. @Whity. It holds the Topeak ratchet as well as spare chain links. I have used 5x1,6mm round…
I needed a way to attach my iPhone with a Topeak Ride Case to my Enve Aero Stem computer mount, so I designed this adapter. I used a brass insert pressed in from the top. A bolt from the underside secures it in place so it won't pull out.…
Replacement bracket for Topeak wedge saddle bag. Worked best by printing upside down with supports on the wings.
Magnets are a good failsafe to keep the bits in place.
I created this clip to keep the Topeak rocket ratchet and driver together when throwing it in my pocket or tool pouch. This also has a knurled sleeve for the driver to make it more functional when working in tight spaces. I've used this…
An inline mount for the Topeak Mountain TT pump. The standard bracket is design to offset it to the side of a bottle cage. Dpedning on your setup you may not want this or want to mount to a top tube where the offset causes it to hit your…
Following the theft of my daughter's bike she lost the mounting for her mobile phone holder. In two parts it is clamped the the handlebar using spares from any Prusa kit. The lower parts has a recess to allow for a brake cable and needs…
A replacement patch for the Topeak SuperSteel Lever. Mine got lost and without you might scratch your rim. I printed mine using PETG, the material gets slightly crushed but absorbs the metal lever and worked well for me.
