FilamATrix TZ V6 2.0 Hotend Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stealthburner FilamATrix hotend mount/duct for the TZ V6 2.0 hotend
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 483
- Wydruki
- 4
- Wyświetlenia
- 3543
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The FilamATrix toolhead is great, but the Dragon HF mount just let too much air blow across the heat block of the TZ V6. I remixed the geometry of the Stealthburner mount from Citywrecker and combined it with the Dragon HF duct from FilamATrix.
If you are using a V6 nozzle, print the “v6 nozzle” files as the v6 nozzles are 2mm longer than the TZ nozzles that come with the hotend. The mounting position has been moved 2mm higher on this version. This is untested, so please let me know if it needs changes.
If you are using AFC-Klipper-Add-On, these values have been used successfully. Please use these as a starting point, not as a requirement:
| Variable | CW2 | G2E |
| tool_stn | 52 | 67 |
| tool_stn_unload | 62 | 77 |
| variable_retract_length | 22 | 22 |
| variable_pushback_length | 10 | 10 |
Aug 16, 2025 Update: mounting holes have been fixed on the v6 nozzle version of the mount to be compatible with the screws that come with the hotend. Thank you, @WizardUli for the feedback.