1 / 3
Split Voron Exhaust Cover with Bowden and PUG Umbilical Pass-Through Mounts — zdjęcie 1
1 / 3

Split Voron Exhaust Cover with Bowden and PUG Umbilical Pass-Through Mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet another exhaust cover for your Voron. This one is split into two pieces for easy PUG umbilical mounting.

Ocena
5 / 5
Polubienia
52
Pobrania
321
Wydruki
3
Wyświetlenia
1600
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This cover was designed to clamp onto the umbilical cable without needing to disassemble the cable.

Based on Fiction's Exhaust Cover, but re-implemented in OpenSCAD. Scad files included for customization. Requires adrianschlatter's threadlib and its dependencies. 

Print with Voron part settings. Version with a cutout for USB pass-through is optional.

Requires:

  • 2x M3 heatset inserts and 2x M3x8 SHCS for securing the two halves together.

  • 1x PTFE pass-through fitting for securing the bowden tube. Select the correct stl file for either:

    •  PC4-M10

    •  ECAS04

  • 1x PUG (Parametric umbilical gland)

  • 2x M5x12 and 2x M5 t-nuts for mounting to the Voron frame

Place heatset inserts and M3 screws as shown here:

Use a ball ended hex-driver to secure the halves together.

Color was added with manual color swaps.

Update 2025/06/09: Added split rear center skirt for v2 300

Update 2025/09/01: Added split rear center skirt for v2 350 and 250

Update 2026/02/16: Moved split rear center skirt to https://www.printables.com/model/1603941-split-rear-center-skirt-with-pug-pass-through-for. Added ECAS versions. Added Deep version for panel 9mm panel thickness.

Tagi