Split Voron Exhaust Cover with Bowden and PUG Umbilical Pass-Through Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another exhaust cover for your Voron. This one is split into two pieces for easy PUG umbilical mounting.
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 321
- Makes
- 3
- Views
- 1,600
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This cover was designed to clamp onto the umbilical cable without needing to disassemble the cable.
Based on Fiction's Exhaust Cover, but re-implemented in OpenSCAD. Scad files included for customization. Requires adrianschlatter's threadlib and its dependencies.
Print with Voron part settings. Version with a cutout for USB pass-through is optional.
Requires:
2x M3 heatset inserts and 2x M3x8 SHCS for securing the two halves together.
1x PTFE pass-through fitting for securing the bowden tube. Select the correct stl file for either:
PC4-M10
ECAS04
2x M5x12 and 2x M5 t-nuts for mounting to the Voron frame
Place heatset inserts and M3 screws as shown here:

Use a ball ended hex-driver to secure the halves together.
Color was added with manual color swaps.
Update 2025/06/09: Added split rear center skirt for v2 300
Update 2025/09/01: Added split rear center skirt for v2 350 and 250
Update 2026/02/16: Moved split rear center skirt to https://www.printables.com/model/1603941-split-rear-center-skirt-with-pug-pass-through-for. Added ECAS versions. Added Deep version for panel 9mm panel thickness.